The HG Mould Remover Foam Spray is a fast-acting formula which gets to work in under 30 minutes, quickly removing mould, mildew and fungus.
The foam remains on the surface for longer to tackle stubborn mould marks, and features a low odour formula with less chance of splashing.
Ideal to use on the silicon seal between the bathtub and wall, on outdoor furniture, around window frames or other surfaces.
This anti mould foam is also suitable for cleaning grout, swimming pool tiles and seals, as well as mouldy stains in the garage, shed and conservatory.
Includes: 1 x HG Mould Remover Foam Spray (500ml spray bottle)
How to use HG mould cleaner:
The mould spray has a bleaching effect. If in doubt, test first in an inconspicuous place.
1. Spray the surface from 3 to 5 cm away.
2. Leave for 30 minutes, then clean with water and a sponge.
Contains chlorine based bleaching agents. We recommend using gloves and ventilating well during use. Use biocides safely. Always read the label and product information before use.
HG Mould Remover: Effortlessly eliminates all moulds, making filthy black stains disappear in under 30 minutes
Suitable for a wide range of surfaces: Removes mould & fungus from walls, tiles, bathroom seals, windows & more
For indoor or outdoor use: Kills algae & mould marks around swimming pools, in the garage, shed, washing area, shower cubicle, sauna & conservatory
Fast acting: This rapid use mould & mildew remover immediately cleans fungus marks from damp areas. The foam remains on the surface for longer & reduces splashing
500ml size HG Mould Foam Spray: Anti mould cleaner with a bleaching effect. Low odour formula. Test first in an inconspicuous place before applying. Look at the label for not recommended surfaces such as wood or plastic
Danger
Causes serious eye damage.
Causes severe skin burns and eye damage.
Use biocides safely. Always read the label and product information before use.
Very toxic to aquatic life with long lasting effects.
Warning! Do not use together with other products. May release dangerous gases (chlorine).
Attention: we recommend you ventilate well during use and wear rubber/plastic gloves.
Prevent splashing your clothing, gloss paint or slats.
Rinse immediately with water on contact.
Prevent contact with metals, such as prints on decorative strips, aluminium and stainless steel.
Do not treat coloured surfaces.
We do not recommend the use of this product on ceilings with decorative plaster.
Some permanent brown discolouring may occur after use on light elastic joints (e.g. silicon sealant).
You may also see brown colouring on poorly glazed tiles or old tiles with hair cracks.
This brown colour could be removed with hypo (sodium thiosulphate)
The bottle may not be reused.
causes severe skin burns and eye damage.
H410- very toxic to aquatic life with long lasting effects.
Euh2o6- warning!
Do not use together with other products. May release dangerous gases (chlorine). P101- if medical advice is needed, have product container or label at hand. P102- keep out of reach of children. P280- wear protective gloves and eye protection. P303+p361+p353- if on skin (or hair): take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+p351+p338- if in eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P501- dispose of contents and container in accordance with all local, regional, national and international regulations. Contains: sodium hypochlorite, einecs: 231-668-3
